Complete your containment toolkit
The parts that make a barrier into containment — panel hardware, machines, filters, and mats, quoted alongside the wall.
Rapid Room panel accessories
1 1/2" x 1/2" Foam Tape
Self-adhesive closed-cell foam that compresses against floors, walls, and ceilings to seal gaps along the panel edge and keep the enclosure airtight. (1 roll, 25 ft per roll)
Panel clamp
A hand-tightened clamp that locks adjacent panels together or secures a panel edge to a fixed object, with a T-handle screw and no tools required. (1 clamp)
Extension legs
Raises the barrier to reach taller ceilings, extending the panel's adjustable range while keeping the same sealed top and bottom.
Ceiling grid clips
Clamps the top of the panel to the ceiling grid tee for a rigid, sealed head with no penetrations and nothing left behind at teardown. (Pack of 10)
Wall adapter
Closes the gap where the barrier meets a wall. Telescopes 6.5" to 11.5" to take up out-of-plumb walls and uneven finishes for a sealed edge.
Request a quote
Adjustable hinge
Rotates panel to panel so the wall can turn a corner or follow an angled corridor at any angle from 90 to 20 degrees, without tools or custom parts.
Containment accessories
Sticky Mat, 24" x 36" (Case of 4)
4 mats per case, 60 peel-away sheets each. Sits at the barrier threshold and lifts dust from shoes and wheels before it leaves the work zone.
Containment Tape, White, 2.83" x 60 yd
Single-sided white tape, 2.83" wide on a 60 yd roll. Seals seams, penetrations, and edges around the containment, releasing cleanly from finished surfaces. (1 Roll)
Flexible Ducting, 12" x 25'
12" diameter, 25' long. Carries exhaust from the machine to a window, wall, or ceiling outlet, and collapses flat for storage between jobs.
Two-Stage Poly Pad Pre-Filter MERV 9
A two-stage poly pad that catches coarse dust ahead of the HEPA filter, extending HEPA life and keeping airflow steady on the machine. (20 Pack)
HEPA Filter - 15" x 15" x 6", ABS Frame
A lightweight HEPA filter in a molded ABS frame for the compact negative air machine, sized for patient rooms and small work areas.
HEPA Filter - 24" x 18" x 12", Metal Frame
A certified HEPA filter in a galvanized metal housing for the high-capacity negative air machine, built for long runs and repeated deployments.
500–2000 CFM Negative Air Machine
A high-capacity machine for corridors and larger enclosures, with the airflow headroom to hold negative pressure across a long barrier run.
200–600 CFM Negative Air Machine
A compact machine for patient rooms and small work areas. Pulls the enclosed space negative and exhausts through HEPA filtration.